Blince Focus on hydraulic products,such as hydraulic orbital motor,hydraulic pump since 1981. Provide professional hydraulic solution.
You’re in the right place for Replace Danfoss.By now you already know that, whatever you are looking for, you’re sure to find it on Blince.we guarantee that it’s here on Blince. We aim to provide the highest quality Replace Danfoss.for our long-term customers and we will actively cooperate with our customers to offer effective solutions and cost benefits.
OMER Series motor adapt the advanced Geroler gear set designed with high speed distribution flow and high pressure, and have good stability in low speed, and can keep high volume efficiency. The unit can be supplied the individual variant in operating multifunction in accordance with requirement of applications.Characteristic features:1. Advanced manufacturing devices for the Geroler gear set, which use low pressure of start-up, provide smooth and reliable operation and high efficiency. 2. The output shaft adapts in needle roller bearings that permit high axial and radial forces. The case can offers capacities of high pressure and high torque in the wide of applications. 3. Advanced design in high speed distribution flow, which can automatically compensate in operating with high volume efficiency and long life, provide smooth and reliable operation. 4. Lowest leakage rate, most accurate timing methods. Commutator rotates 6x faster than shaft speed. It make the distribution in a high precision reduces life-cycle cost, maintain high volume efficiencies and can run very smoothly at low speed, gear box not required.Product application:Blince hydraulic motors are widely applied in agriculture machinery, fishing machinery, plastic industry, mining, and construction machinery, especially fitted to lower load applications, such as plastic injection mold machine, cleaner, grass cutter,Winches, Conveyors, Slews, Sweeper Drives, Augers, Cutters, Mowers and Chippers.
OMV/8000/8K/HMV/BMV series orbital hydraulic motors are widely applied in agriculture machinery, fishing machinery, plastic industry, mining, and construction machinery, especially fitted to lower load applications, such as plastic injection mold machine, cleaner, grass cutter,Winches, Conveyors, Slews, Sweeper Drives, Augers, Cutters, Mowers and Chippers.
OMH series motor adapt the advanced Geroler gear set design with shaft distribution flow, which can automatically compensate in operating with high pressure, provide reliable and smooth operation, high efficiency and long life.
MANUFACTURING EXPO THAILAND 2018In order to develop and occupy the Southeast Asian market.We participated in Thailand and Vietnam International Machinery Exhibition.At exhibition,we can comunicate with customer face to face.Get more detail requirement about product and price. Customers can see our products and experience our services. Fastly, we developed several local agents.
Equivalent danfoss OMM, char-lynn J series 129-xxxx-xxxOrbital hydraulic motors MM and MMS are lightweight, small gerotor motors are designed for continiuous work in light conditions. The MM motors can transfer low power at relatively high rotational speed in comparsion with other motors with similar construction. They can reach maximum power up to 3.2 kW.Rotational speed range: from 20 through 1950 rpm; maximum continuous pressure: up to 105 bar.Main Features:1,Displacement: 8.2 - 50 cm3/rev;2,Rotational speed range: 20 - 1950 rpm;3,Maximum pressure: from 70/125 bar through 105/200 bar (continuous/peak);4,Maximum power: 2.1 - 3.2 kW.
Mr.Anthony from Brazil visited Blince-Hydraulic in 2020. He hope we can design an hydraulic power unit for his Agricultural harvester.Engineer directly communication with him and get all detail requirement. Then we make the solution and sent to customer for check. After several times revised and re-check. Customer very satisfiled with our solution. According this solution,factory make the same power unit. At last,customer get and test at his machine work very well.Look forward to more cooperate in future.
Dongguan Blince Machinery & Electronics Co., Ltd. specializing in design, manufacturing and sales of hydraulic product include orbital motor, radial piston motor, hydraulic pump, steering control unit, hydraulic valve and oil cooler. Orbital motor from small OMM type to large torque OMS, OMT and OMV series. Vane pump include Yuken PV2R series, Vickers V/VQ series and Tokemic SQP series and Denison T6/T7 series. Radial piston motor like NHM1 to NHM31 replace Intermot and staffa. We are located in Dongguan city which is an manufacturing city nearby Shenzhen Guangzhou port.It is very convenient for us to arrange shipment by sea.Over 30 years experience on product research development and With complete production equipment, strong R&D ability, advanced technologies, and precise testing equipment. Blince Hydraulic products are of high and stable quality. Blince hydraulic product widely used in the agriculture machinery, engineering machinery, engineering vehicles, plastics machinery, marine equipment etc. We also welcome OEM and ODM orders.Our product exported to the whole world like Southeast Asia, North American, South American, Africa and European.Blince products are 100% tested prior to dispatch. After test and check everything is ok, we arrange shipment to customer. All of our product warranty 12 month. What you can get from Blince is Stable Quality, Comparative Price, Technical Support, in-time Delivery, Reliable After-sales. Warm welcome to visit our company, we will show you all what you want.
OMR series motor adapt the advanced Geroler gear set design with shaft distribution flow, which can automatically compensate in operating with high pressure, provide reliable and smooth operation, high efficiency and long life.
Hydraulic vane pump is high pressure and high performance pump, it is are widely used for plastic machinery, casting machinery, metal machinery, pressing machinery, refining machinery, construction machinery, marine-Machinery.
Axial piston unit of bent axis design with fixed displacement, for use as either pump or motor in hydrostatic drives, in open or closed circuit. If operated as a pump, the flow is proportional to the drive speed and displacement. If operated as a motor, the output speed is proportional to the swept volume and inversely proportional to displacement. The output torque increases with the pressure drop between the high and low pressure sides.
If You Have More Questions, Write To Us
Just tell us your requirements, we can do more than you can imagine.